SNYPER-IoTS Graphyte (GL)

The SNYPER-IoTS Graphyte (GL) is a high performance, multi-language network signal analyser and cellular signal logger, dedicated to surveying the NTN (Satellite), LTE-M, NB-IoT & 2G/GSM networks.

The unit can be left to conduct sequential surveys in a fixed location and automatically save them. Different types of survey can be performed: a “FULL” survey (NTN, LTE-M, NB-IoT and 2G), or any combination of NTN, LTE-M, NB-IoT and GSM

Each survey logs network signal strength, cell parameters, and location via the internal GNSS receiver. Surveys can be chosen to be a single cycle or multiple cycles. Multi- cycle surveys can identify unreliable cells or satellites & intermittent cellular service which is not possible with single surveys.

SNYPER-IoTS Graphyte (GL) can typically save 10,000 single cycle surveys onto the internal solid-state memory! Results may be downloaded using a USB-C connection to a PC in CSV or HTML formats. This allows users to analyse the collected cell data in a spreadsheet or a web browser to make informed decisions.

The powerful SNYPER-IoTS Graphyte (GL) summary page displays the relative signal levels and operators of all the cells discovered allowing the user to determine most suitable mobile network operator available.

The SNYPER-IoTS Graphyte (GL) can also be used to help establish optimum antenna placement and perform local site surveys.

3 Supported Bands IoT-NTN (MHz):
» n23 (1600), n255 (1600), n256 (2100)

» 18 Supported Bands LTE-M (MHz):

» B1 (2100) / B2 (1900) / B3 (1800) / B4 (1700) / B5 (850) / B8 (900) / B12 (700) / B13 (700) / B14 (700) / B18 (850) / B19 (850) / B20 (800) / B25 (1900) / B26 (850) / B27 (800) / B28 (700) / B66 (1700) / B85 (700)

» 17 Supported Bands NB-IoT (MHz):

» B1 (2100) / B2 (1900) / B3 (1800) / B4 (1700) / B5 (850) / B8 (900) / B12 (700) / B13 (700) / B18 (850) / B19 (850) / B20 (800) / B25 (1900) / B26 (850) / B28 (700) / B66 (1700) / B71 (600) / B85 (700)

» 4 Supported Bands GSM / EGPRS (MHz):
» B2 (1900) / B3 (1800) / B5 (850) / B8 (900)

» GNSS Support:
» GPS, GLONASS, BeiDou and Galileo

• »  View cell signal strength and cell parameters

• »  View number of GNSS satellites observed by constellation

Recommended Power Supply

» USB A Charger O/P: 5 V DC 2000 mA

Supplied Accessories

» 1 x Delta 47 Antenna (600 MHz - 3800 MHz) » 1 x NTN Swivel Antenna
» 1 x Delta 61 Active GPS Antenna
» Male USB-A to Female USB-C adaptor

» 2 m USB-C 2.0 for PC interface and for battery charging

» Mini Tripod
» Mounting Adaptor for Mini Tripod » LiveSCAN Antenna
» 1.5m LiveSCAN Low Loss cable

Environmental

Dimensions

• »  SNYPER: 141 mm x 76 mm x 36 mm

• »  Weight without antenna: 265g

• »  Operating Temperature Range: -10 to +60 deg C

• »  Operating Humidity Range: 25 to 85% RH Non- condensing

• »  Battery: Sufficient for a 12 hour continuous survey (typical)

  Reporting

  HTML Reporting

  • »  Graphical display ordered by signal strength

  • »  Complete summary breakdown for all recorded cells

  • »  Recorded survey date, time and position

  • »  Access to Siretta’s CloudSURVEY portal for storing and viewing surveys (Registration Required)

    CSV Reporting

  • »  Complete survey breakdown for each recorded cell

  • »  Spreadsheet format allows for easy analysis

• »  480 x 640 colour TFT display

• »  Long life rechargeable battery

• »  USB-C cable for PC connection and power/charging

• »  USB-C download of device results to PC

• »  Rugged and durable construction

• »  Integrated belt clip

• »  Supplied with a hard carrycase for device and accessories

• »  Multiple language support (English/French/German/Italian/ Polish/Spanish)

  Interfaces

• »  2 x SMA female cellular antenna connectors

• »  1 x SMA GNSS antenna connector

• »  1 x SIM card reader (push-push) 3 V, 1.8 V

• »  Red LED charging indicator

• »  Display: 2.4” Diagonal VGA 480 x 640 RGB TFT with LED backlight

• »  Display: 80 degree viewing angle

• »  Display Brightness: 700 cd/m2