Nordic nRF52840 Ver.2 Raytac BT5 Module Demo Board BLE Bluetooth Development Kit

MDBT50Q-DB-40 demo board is designed for quick testing and debugging without building your own board. The board is only available with MDBT50Q-1MV2 (Chip Antenna) module. 

Raytac nRF52840 module spectrum covers MDBT50Q-1MV2, MDBT50Q-P1MV2 and MDBT50Q-U1MV2 series with Chip Antenna, PCB Antenna and u.FL connector for External Antenna option for selection. 

Features:

• Complete BT5 & BT4.2 low energy solution with integrated chip antenna
• Compact size with 10.5 x 15.5 x 2.2 mm
• BT5 End Product qualified.
• Supports Bluetooth 5, IEEE 802.15.4 & 2.4Ghz RF & ANT upon customer's preference.
• Pre-Certifified Module: FCC/IC/CE/Telec/KC/SRRC/NCC certified.
• Highly flexible multiprotocol SoC ideally suited for Bluetooth® Low Energy and 2.4GHz ultra low-power wireless applications.

Specifications:

• 32-bit ARM® Cortex™ M4F CPU
• Supply: 1.7V – 5.5V
• Flexible and configurable 48 GPIO
• Bluetooth 5, IEEE 802.15.4, 2.4 GHz transceiver
• -95dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
• -103dBm sensitivity in 125Kbps BLE mode (long range)
• +8 dBm TX power (down to -20 dBm in 4 dB steps)
• On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series 
• Programmable output power from +8dBm to -20dB
• RSSI (1dB resolution)?€?Supported data rates:
• Bluetooth 5: 2Mbps, 1 Mbps, 500 kbps, 125 kbps                                                                              
• IEEE 802.15.4-2006: 250 kbps                                                                                                         
• Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
• Advanced on-chip interfaces
• USB 2.0 full speed (12Mbps) controller
• QSPI 32MHz interface
• High speed 32MHz SPI
• Type 2 near field communication (NFC-A) tag with wake-on field?€?Programmable peripheral interconnect (PPI)
• EasyDMA automated data transfer without CPU processing on peripherals?€?12 bit, 200ksps ADC – 8 configurable channels with programmable gain
• 4 x 4 channel pulse width modulator (PWM)units with EasyDMA
• Audio peripherals : I2S, digital microphone interface (PDM)
• 5 X 32-bit timers with counter mode
• Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
• Up to 2 x I2C compatible 2-wire masters / slaves
• 2 x UART(CTS/RTS) with EasyDMA
• Quadrature decoder (QDEC)
• 3 x 24-bit real-time counters (RTC)
• Operating Temp: -40°C to +85°C

Documents

 MDBT50Q-DB Website

 MDBT50Q Datasheet