Loading... Please wait...

6-Port Industrial PoE+ Gigabit Light Layer 3 Managed Ethernet Switch (EOT: -40~75C, 12~36VDC)

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Antaira
£596.42
SKU:
LMP-0601G-SFP-24-T-V2
Condition:
New
Availability:
normal delivery is 2 weeks from date of order. We will advise you within 48 hours of receiving your order the estimated delivery date.
Shipping:
Calculated at checkout
This product is available for pre-order only

 Product Description

OVERVIEW:

Antaira’s LMP-0601G-SFP-24 series is a 6-port industrial PoE+ gigabit Light Layer 3 managed Ethernet switch that is embedded with 4*10/100/1000Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, 1*10/100/1000Tx Fast Ethernet port, and 1*100/1000 dual rate SFP slot for fiber connection.

The LMP-0601G-SFP-24 series is a fully manageable industrial Ethernet switch pre-loaded with standard Light Layer 3 network management software, and supports a low voltage redundant power input range from 12~36VDC with a voltage booster. This product series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range ( STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

 

FEATURES:

  • Supports 4*10/100/1000Tx IEEE 802.3at/af Compliant with 30W/Port, 1*10/100/1000Tx, + 1*100/1000 SFP Slot
  • Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Telnet, CLI Command
  • Supports IGMP v1/v2, up to 256 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c
  • System Warning Setting for Automatic Warning through E-Mail
  • Redundant Power Input Design: 12~36VDC (Voltage Booster)
  • Housing: Metal IP 30 Rated; DIN-Rail and Wall Mount Support
  • Operating Temperature - EOT: -40~75C
  • 5-Year Warranty

 

SPECIFICATIONS:

Ambient Relative Humidity 5 to 95%, (non-condensing)
Back Plane Non-blocking
Certifications FCC, CE
Configuration Http, Https, Telnet, SSH, CLI, TFTP, SNMP v3
Dimensions 54 x 142 x 99 mm (W x H x D)
EMI FCC Part 15 Subpart B Class A, 
CE EN55022/EN61000-6-4 Class A
EMS CE EN55024/EN61000-6-2 Class A,
IEC61000-4-2,3,4,5,6,8
Ethernet Port 5*10/100/1000Base-TX, auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Fiber Port SFP dependent
Flow Control IEEE 802.3x flow control, back pressure flow control
Free Fall / Shock / Vibration IEC60068-2-32/IEC60068-2-27/IEC60068-2-6
Green RoHS Compliant
Housing Metal, IP30 protection
IGMP 1024
Input Voltage 12~36VDC Redundant Input
Jumbo Frame 9.6Kbytes
L2 Switching Port/MAC/Protocol/IP Subnet-based VLAN, VLAN trunking, GARP/GVRP, Loop Guard, Link Aggregation static/LACP, BPDU guard, Error disable recovery, IGMPv2 snooping, MLD snooping, IGMP filtering, IPMC throttling / filtering leave proxy, DHCP snooping, ARP, MEP, G.8032 v1/v2
L3 Switching DHCP option82, static routes
LED Indicators System: Power 1, Power 2, Master, Ring, Fault
Ethernet Ports: Speed/Link/Active
Fixed Fiber: Link/Active
MAC Table Size 8K
Management IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDP-MED, HTTP, HTTPS, SSHv2 telnet, DHCP client, DHCPv6 client, DHCP server, Port Mirror, DNS client/proxy, IP based Access Filter, ICMPv6, syslog, Time Zone /Daylight Saving, NTP client, RMON, sFlow, Loop detection, Console Port, USB configuration backup/restore, Power lost warning, relay trigger
Memory Buffer 4Mbits
Mounting DIN-Rail; Wall-mount (optional)
Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m)
1000Base-TX: 4-pair UTP/STP Cat. 5e, 6 cable EIA/TIA-568 100-ohm (100m)
Network Redundancy STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2(<50ms)
Operating Temperature EOT: -40° to 75°C
Optical Cable SFP dependent
Overload Current Protection Present
Poe Pin Assignment V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)
Power Connection 1 removable 6-contact terminal block
Power Consumption 7.5W
Power Saving ActiPHY, PerfectReach, IEEE 802.3az EEE power management
Priority Queues 8
Processing Type Store and Forward
QoS 802.1p Queueing, Input priority mapping, Storm control for Unicast/Multicast/Broadcast, Port/Queue/ACL policer, Port egress shaper, Queue egress shaper, DiffServ (DSCP), Tag remarking, Scheduler mode
Relay Contact 24 VDC, 1A resistive
Reverse Polarity Protection Present
Security Port-based/Single/Multi 802.1X, ACL (Port/Rate Limiters/ACE), MAC-based Authentication, VLAN assignment, QoS Assignment, Private VLAN, Guest VLAN, RADIUS accounting, TACACS+, IP MAC binding, WEB/CLI authentication, Authorization (15 levels), Port Security Limit Control, ACLs for filtering/policing/port copy, IP source guard, ARP Inspection
Serial Console 1*RS232 in RJ45 connector with console cable, baud rate 115,200bps,8,N,1
SNMP MIBs & RFC Standards RFC 2674 VLAN MIB
IEEE-802.1Q bridge MIB 2008
RFC 2819 RMON (group 1, 2, 3, and 9)
RFC 1213 MIB II
RFC 1215 TRAPS
RFC 4188 bridge
RFC 4292 IP forwarding table
RFC 4293 management information base for the Internet Protocol (IP)
RFC 5519 multicast group membership discovery
RFC 4668 RADIUS auth. client
RFC 4670 RADIUS accounting
RFC 3635 Ethernet-like
RFC 2863 interface group MIB using SMI v2
RFC 3636 802.3 MAU
RFC 4133 entity MIB v3
RFC 3411 SNMP management frameworks
RFC 3414 user-based security model for SNMPv3
RFC 3415 view-based access control model for SNMP
RFC 2613 SMON – PortCopy
IEEE 802.1 MSTP
IEEE 802.1AB LLDP-MIB (LLDP MIB included in a clause of the STD)
IEEE 802.3ad (LACP MIB included in a clause of the STD)
IEEE 802.1X (PAE MIB included in a clause of the STD)
TIA 1057 LLDP-MED ( MIB is part of the STD)
Standards IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX Gig Ethernet
IEEE 802.3u 100Base-FX Fiber
IEEE 802.3ae 1000Base-FX Fiber
IEEE 802.3x Flow Control
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 / Y.1344 ERPS v1/v2 (Ethernet Ring Protection Switch)
IEEE 802.1Q Virtual Local Area Network (VLAN)
IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
IEEE 802.1X Network Authentication
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.3ad Link Aggregation (LACP)
Storage Temperature -40°~85°C
System Diagnostics Dual Image Protection, PING, PING6
Transfer Rate 14,880pps for Ethernet Port
148,800pps for Fast Ethernet Port
1,488,000pps for Gig Ethernet Port
VLAN 4095
Warranty 5 Years
Wavelength SFP dependent
Weight Unit: 1.9lbs.; Shipping: 2.7 lbs.

 

INCLUDED:

  • 1 - DC cable - 18 AWG & DC jack 5.5 x 2.1mm
  • 1 - LMP-0601G-SFP-24-T-V2
  • 1 - Quick Installation Guide
  • 1 - RJ45 dust cover set
  • 1 - RJ45 to DB9 Serial Console cable
  • 1 - Wall mounting bracket set with screws

 

DOCUMENTS

icon-pdf2.gif Hardware Manual

icon-pdf2.gif Product Datasheet

icon-pdf2.gif Software Manual

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Follow us on

Copyright 2024 Glyn Store. All Rights Reserved.
| Sitemap |


Click the button below to add the 6-Port Industrial PoE+ Gigabit Light Layer 3 Managed Ethernet Switch (EOT: -40~75C, 12~36VDC) to your wish list.