JN5148 ZigBee PRO Module with Integrated Antenna

The JN5148-001-Myy family is a range of ultra low power, high performance surface mount modules targeted at low power wireless networking applications, enabling users to realise products with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites. The modules use our JN5148 wireless microcontroller to provide a comprehensive solution with large memory, high CPU and radio performance and all RF components are included.  All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development.

Three module variants are available: JN5148-001-M00 with an integrated antenna, JN5148-001-M03 with an antenna connector and JN5148-001-M04 with an antenna connector, power amplifier and LNA for extended range.  All modules can run networking stacks such as JenNet and ZigBee PRO as well as customer applications.

Features: Module (JN5148-001-M00)

• 2.4GHz IEEE802.15.4 and ZigBee PRO applications
• Sleep current (with active sleep timer) 2.6µA
• Industrial Temp (-40°C to +85°C)
• Lead-free and RoHS compliant
• integral antenna 18x32mm
• TX power +2.5dBm
• Receiver sensitivity -95dBm
• TX current 15mA
• RX current 17.5mA
• 2.3-3.6V operation

Features: Microcontroller (JN5148)

• 32-bit RISC CPU, up to 32MIPs with low power
• 128kB ROM stores system code
• 128kB RAM stores system data and bootloaded program code
• 4Mbit serial flash for program code and data
• On chip OTP efuse
• JTAG debug interface
• 4-input 12-bit ADC, 2 12-bit DACs, 2 comparators
• 3 Application timer/counters,
  3 system timers
• 2 UARTs
• SPI port with 5 selects
• 2-wire serial interface
• 4-wire digital audio interface
• Watchdog timer
• Up to 21 DIO

Benefits

• Microminiature module solutions
• Ready to use in products
• Minimises product development time
• No RF test required for systems
• Compliant with FCC part 15 rules, IC Canada RSS 210e, ETSI ETS 300-328 and Japan ARIB STD-T66
• Production volumes supplied pre-programmed with application software

Applications

• Robust and secure low power wireless applications
• IEEE802.15.4 networks including JenNet, JenNet-IP and ZigBee PRO
• Home and commercial building automation
• Utilities metering (e.g. AMR)
• Location Aware services (e.g. Asset Tracking)
• Toys and gaming peripherals
• Industrial systems
• Telemetry
• Remote Control

Documentations

• JN5148 Module Product Brief
  
• JN5148 Module Datasheet
• JN5148 Wireless Microcontroller Product Brief
• JN5148 Wireless Microcontroller Datasheet
• JN5148-EK010 Product Brief
• JN5148-EK010 User Guide
• JN5148 SDK Installation and User Guide