Service Power Adapter for Battery Plus - with ANZ Plug

Product Description

The RAK Battery Plus Service power adapter is designed for use with the RAK Battery Plus (RAK9155) to fully charge it in-house before deployment. This adapter enables quick and reliable charging of the battery, particularly useful after extended storage or to simulate a full power cycle for servicing and evaluation purposes. It provides a 19V DC output with a 9.47A current and 180W power, featuring a dedicated connector that matches the Battery Plus input (PV input).

Product Features

• Input: 100-240 V AC (50~60 Hz)
• Output: 19 V DC 9.47 A
• Rated power: 180 W
• Overcurrent protection, Short Circuit protection, Over Voltage protection
• Operational temperature: 0℃ to +40℃
• Operational humidity: 5%RH to 95%RH （non-condensing）
• Usage type: indoor
• DC cable: 1.2m with Battery Plus input (PV input) connector

Product Inclusions

• 1 pc Power Adapter
• 1 pc Power Cable - please note this comes with ANZ Plug, if you need a plug for another region (eg EU, UK, or US we can bring these in to you as required)

Documentation

• Battery Plus Service Power Adapter Datasheet

Key Features

• Protection Modes: L-L/L- PE
• Rated voltage: 36-57VDC
• Supported PoE standard:
• IEEE 802.3at
• IEEE 802.3af
• Rated Operating Current: 1.2A
• Nominal discharge voltage:
• Differential mode: 1kV
• Common mode：6kV
• Maximum Discharge Current: 10kA+
• Voltage Protection level: ≤30V（after 1μs)
• Response Time: 1ns
• Maximum Data Rate: 1000mbps
• Connector: RJ45
• Ingress Protection Rating: IP20
• Operating Environment:
• Ambient Temperature: -40°C~+85°C
• Relative Humidity: 5%-95%
• Dimensions: 124x40x28mm
• Reference standards: YD/T1542-2006; GB/T 18802.21-2016; GB/T 2423-2008; EN61643-11 2011